5627533 - .75 Inch Red ID Light Kit With Male Bullets With 9 LED

Buyers Products 0.75 Inch ID Light Kit is used on trucks and trailers to meet FMVSS/CMVSS 108 regulations. The kit includes a wiring harness and grommets. It hard wire installs with .180 in. male bullet connectors. Lights are backed with a limited lifetime warranty.

Specifications

The Buyers Products 0.75 Inch Red ID Light Kit with Male Bullets and 9 LEDs represents a sophisticated and essential component for ensuring regulatory compliance and enhanced safety across a diverse range of commercial and private vehicles. Specifically engineered for integration into trucks and trailers, this identification light kit is meticulously designed to meet or exceed the stringent requirements of Federal Motor Vehicle Safety Standard (FMVSS) 108 and Canadian Motor Vehicle Safety Standard (CMVSS) 108. These standards govern all aspects of vehicular lighting, signaling, and reflective devices, making compliance not merely a recommendation but a mandatory prerequisite for legal operation on public roadways in North America.

At the core of this lighting solution is its compact yet potent design. The .75-inch form factor, denoting a nominal diameter, allows for discreet and versatile mounting without compromising on visibility or performance. This miniature footprint is particularly advantageous in applications where space is at a premium, or where a flush, low-profile aesthetic is desired. Despite its small size, the light integrates an array of 9 high-intensity Light Emitting Diodes (LEDs). This multi-LED configuration is a critical engineering decision, as it ensures superior light output, improved light dispersion, and a robust redundancy in illumination compared to single-LED or traditional incandescent designs. The brilliant red light emitted by these LEDs is specifically calibrated for identification purposes, a crucial aspect of FMVSS/CMVSS 108, which mandates specific color requirements for rear and side marker lighting to enhance vehicle conspicuity to other road users.

Advanced LED Technology for Unparalleled Performance

The transition from incandescent bulbs to LED technology in automotive lighting signifies a paradigm shift in reliability, efficiency, and longevity. This .75 Inch Red ID Light Kit capitalizes on these advancements by incorporating 9 high-quality LEDs. Each LED operates as a solid-state semiconductor device, converting electrical energy into light with significantly greater efficiency than traditional filament bulbs. This inherent efficiency translates directly into a substantially lower electrical draw, documented at a mere 0.113 Amperes at 12 Volts, corresponding to a power consumption of only 1.36 Watts. Such low power requirements are highly beneficial for commercial vehicles, as they reduce the strain on the vehicle's electrical system, minimize parasitic loads, and can contribute to marginal improvements in fuel efficiency by decreasing alternator workload.

Beyond efficiency, the operational lifespan of LEDs far surpasses that of incandescent bulbs. While incandescent bulbs typically last a few thousand hours, LEDs are often rated for tens of thousands of hours, sometimes exceeding 50,000 hours of continuous operation. This exceptional durability is attributed to the absence of a fragile filament, rendering LEDs highly resistant to vibrations, shocks, and temperature fluctuations commonly encountered in demanding truck and trailer environments. The solid-state nature of LEDs also provides instantaneous illumination, a critical safety feature that ensures immediate signaling and improved reaction times for following vehicles, although for an ID light, the primary benefit is consistent, long-term visibility.

Rigorous Compliance with FMVSS/CMVSS 108

Compliance with FMVSS/CMVSS 108 is non-negotiable for vehicle lighting components. These comprehensive standards delineate precise requirements for the design, performance, and placement of all lighting devices on motor vehicles and associated equipment. For an identification light, often positioned in groups of three on the rear of trailers or wide vehicles, the standard specifies requirements pertaining to photometric output (candela distribution), color chromaticity, visibility angles, and durability under various environmental conditions. The Buyers Products .75 Inch Red ID Light Kit has been engineered from its foundational design to its material selection to meet these exacting specifications, thereby providing users with peace of mind regarding legal operational compliance.

FMVSS 108, specifically, aims to reduce crashes and injuries by ensuring consistent and effective vehicle lighting for all types of vehicles operating on U.S. roads. It covers everything from headlamps and taillamps to marker lights, turn signals, and, critically, identification lights. These lights serve to quickly convey the presence and dimensions of larger vehicles, particularly their width, to other drivers. The red color specified for this ID light aligns with regulatory requirements for rear-facing lights, which universally signify the rear of a vehicle and caution. By adhering to these benchmarks, the light kit contributes directly to the overall safety ecosystem of road transport, mitigating risks associated with inadequate vehicle conspicuity, especially during periods of low visibility, adverse weather, or nighttime operation.

Robust Construction and Materials Engineering

The longevity and consistent performance of the .75 Inch Red ID Light Kit are significantly bolstered by its material composition and construction methodology. The housing of the light is manufactured from a high-grade plastic, chosen for its excellent balance of mechanical strength, impact resistance, and weatherability. Automotive-grade plastics are formulated to withstand exposure to a wide array of environmental stressors, including extreme temperatures, UV radiation from sunlight, road salts, chemicals, and physical impacts from debris. This ensures that the structural integrity of the light remains uncompromised over its extensive operational lifespan, preventing ingress of moisture and contaminants that could degrade internal electronic components.

Complementing the robust housing is the lens, fabricated from polycarbonate. Polycarbonate is widely recognized as an exceptional material for automotive lenses due to its superior optical clarity, extraordinary impact resistance, and inherent UV stability. Unlike acrylic or glass, polycarbonate can endure significant physical abuse without fracturing, a critical attribute for lights exposed to the harsh conditions on trucks and trailers. Furthermore, its natural resistance to yellowing or hazing from UV exposure ensures that the red light output remains vibrant and photometrically compliant throughout the light's service life, maintaining optimal visibility and aesthetic integrity. The round shape of the lens is a classic and functional design, providing a broad and uniform light emission pattern typical for identification marker lights.

Streamlined Installation with Male Bullet Connectors

The installation protocol for the .75 Inch Red ID Light Kit is designed for efficiency and reliability, featuring a hard-wired connection via .180 inch male bullet connectors. This specification denotes a direct electrical connection, ensuring maximum power transfer and minimal potential for connection failures compared to less secure plug-and-play interfaces. The .180 inch dimension refers to the diameter of the bullet, a standardized size in automotive electrical systems, facilitating compatibility with existing wiring harnesses or straightforward integration into custom setups. The kit's inclusion of a wiring harness and grommets is a testament to its comprehensive design, providing all necessary components for a professional and secure installation right out of the box.

The wiring harness simplifies the electrical connection process, ensuring that the appropriate gauge wire is used for optimal current flow and minimal voltage drop over typical installation lengths. With two wires, the system is straightforward: one for power (typically positive 12V DC) and one for ground. Proper connection of these wires is paramount for reliable operation. The inclusion of grommets is equally vital for recessed mounting applications. Grommets serve a dual purpose: they provide a secure and vibration-dampening fit for the light within its mounting aperture, and more critically, they act as a protective seal against moisture, dust, and debris. By creating a tight barrier between the light and the vehicle's body panel, grommets prevent environmental elements from reaching and corroding electrical connections or damaging the light’s internal circuitry. This meticulous attention to installation details directly contributes to the light's long-term operational integrity and performance in challenging environments.

Electrical Specifications and System Compatibility

Understanding the electrical specifications of the .75 Inch Red ID Light Kit is crucial for proper system integration and performance. Operating at a nominal voltage of 12 Volts, this light is perfectly suited for the vast majority of commercial trucks, trailers, and utility vehicles that operate on a standard 12V DC electrical architecture. The ultra-low amp draw of 0.113 Amperes, translating to a mere 1.36 Watts of power consumption, underscores the exceptional energy efficiency of the 9-LED configuration. This minimal power demand means that the addition of multiple such ID lights to a vehicle's lighting system will impose negligible strain on the alternator, battery, or existing wiring infrastructure. Users can confidently integrate these lights without concerns about overloading circuits, requiring expensive electrical system upgrades, or prematurely draining vehicle batteries, even during extended periods of engine-off operation for safety compliance (e.g., parked roadside).

The hard-wired design, featuring male bullet connectors, facilitates robust and permanent electrical connections. While a plug is not included with the light unit itself, the male bullet connectors are designed to mate seamlessly with female bullet connectors or can be soldered into a vehicle's existing wiring loom. This approach provides flexibility for custom installations while maintaining a high degree of electrical integrity. The absence of a built-in switch is a standard practice for identification lights, which are typically wired to activate concurrently with other essential vehicle lighting circuits, such as tail lights or marker lights, ensuring automatic compliance whenever the vehicle's lights are active. This streamlined integration simplifies operation and reduces potential points of failure often associated with integrated switches in harsh environments.

Recessed Mounting for Sleek Integration

The recessed mounting type of this ID light kit offers significant advantages in both aesthetics and protective functionality. When a light is recessed, it means it is installed flush or partially submerged within the vehicle's body panel or frame, rather than protruding outwardly. This design choice results in a much cleaner, more integrated appearance, minimizing visual clutter and contributing to a professional, finished look for the vehicle. Beyond aesthetics, recessed mounting provides an additional layer of physical protection for the light. By sitting within the vehicle’s profile, the light is less susceptible to damage from impacts, scrapes, or snags that can occur during loading/unloading, maneuvering in tight spaces, or contact with road debris. This protective attribute is particularly valuable for lights positioned on the sides or rear of trailers, where they are more prone to accidental damage.

The design accommodates a precise fit within a pre-drilled or cut aperture, secured by the included grommets. The grommet ensures not only a snug mechanical fit but also creates a crucial environmental seal, preventing water, dirt, and road grime from infiltrating the mounting hole and potentially damaging the wiring or the light's internal components. This meticulous engineering approach to mounting underscores the product's commitment to long-term durability and performance, even in the most demanding operational scenarios encountered by heavy-duty trucks and trailers.

Warranty and Long-Term Value Proposition

The Buyers Products 0.75 Inch Red ID Light Kit is backed by a limited lifetime warranty, a significant assurance that underscores the manufacturer's confidence in the product's quality, durability, and engineering excellence. A limited lifetime warranty typically covers defects in materials and workmanship for the original purchaser for the serviceable life of the product, excluding normal wear and tear, abuse, or improper installation. This robust warranty offering provides end-users with considerable peace of mind, mitigating the risk of premature failure and the associated costs of replacement and reinstallation.

This warranty, combined with the inherent benefits of LED technology—such as extended lifespan, resistance to vibration, and minimal power consumption—translates into an exceptional long-term value proposition. For fleet operators, minimizing downtime and maintenance costs is paramount. The reliability afforded by a high-quality LED light, backed by such a comprehensive warranty, directly contributes to reduced operational expenditures over the vehicle's lifespan. It ensures that vehicles remain compliant and visible, enhancing safety and avoiding potential penalties for non-compliant lighting. Investing in a product like the Buyers Products .75 Inch Red ID Light Kit is not merely a purchase; it is an investment in safety, regulatory compliance, and enduring operational efficiency for any truck or trailer application.