5626520 - 6 Inch Red Oval Stop/Turn/Tail Light with 20 LEDs Kit (PL-3 Connection, Includes Grommet and Plug)

Buyers Products 6 Inch Oval Stop/Turn/Tail Light with 20 LEDs is used on trucks and trailers to meet FMVSS/CMVSS 108 regulations. The light features a red lens and uses a PL-3 connection. 6 in. black grommets are also available for mounting. Lights are available in bulk (sold in multiples of 10) or individually in a kit that includes a grommet and plug for installation. They are backed with a limited lifetime warranty.

Specifications

The Buyers Products 6 Inch Red Oval Stop/Turn/Tail Light with 20 LEDs Kit represents a sophisticated and essential component for ensuring optimal safety and regulatory compliance across a broad spectrum of commercial and private vehicles. Engineered to meet and exceed the rigorous standards of FMVSS/CMVSS 108, this multi-function lighting solution is meticulously designed for heavy-duty applications on trucks and trailers, providing superior visibility and operational longevity. This comprehensive description delves into the technical specifications, material science, regulatory framework, and practical advantages that underscore the value proposition of this advanced LED lighting system.

At its core, this lighting unit integrates twenty high-intensity Light Emitting Diodes (LEDs), delivering a powerful and unmistakable red illumination for stop, turn, and tail light functions. The adoption of LED technology, as opposed to traditional incandescent bulbs, confers numerous distinct advantages. LEDs offer significantly enhanced energy efficiency, consuming a mere 0.162 amps at 12 volts, translating to a remarkably low wattage of 1.94 W. This minimal power draw reduces the load on vehicle electrical systems, contributing to fuel efficiency and extending the lifespan of other electrical components, including the alternator and battery. Furthermore, LEDs boast an inherently superior operational lifespan, typically lasting tens of thousands of hours compared to the few thousands of hours of incandescent bulbs. This substantial increase in durability directly translates to reduced maintenance intervals and lower total cost of ownership for fleet operators and individual vehicle owners.

Beyond efficiency and longevity, the kinetic properties of LED illumination are critical for safety. LEDs illuminate almost instantaneously, typically in microseconds, providing a faster warning signal to following drivers compared to the relatively slower ramp-up time of incandescent filaments. This fractional reduction in reaction time can be pivotal in preventing rear-end collisions, particularly at highway speeds or in challenging weather conditions where visibility is compromised. The specific array of 20 LEDs is strategically configured within the oval lens to ensure a broad and uniform light output, maximizing photometric performance and visibility across the required viewing angles mandated by safety regulations.

The physical construction of the 6-inch oval light emphasizes robustness and resilience, critical attributes for components exposed to the demanding environments of heavy-duty vehicular operation. The lens is fabricated from high-grade polycarbonate, a material renowned for its exceptional impact resistance, optical clarity, and inherent UV stability. Unlike acrylic or standard plastic lenses, polycarbonate is highly resistant to chipping, cracking, and yellowing from prolonged sun exposure, ensuring that the light maintains its photometric integrity and aesthetic appearance over years of service. This superior material choice safeguards the internal LED array from physical damage and environmental degradation, thereby upholding the lamp's consistent performance. The housing, constructed from durable plastic, provides a lightweight yet sturdy enclosure for the sophisticated LED circuitry, offering excellent corrosion resistance and contributing to the overall integrity of the unit against road debris, moisture, and temperature fluctuations.

The design incorporates a recessed mounting type, which offers significant practical benefits. When installed with the accompanying 6-inch black grommet (included in the kit and also available for bulk purchase), the light sits flush or partially recessed within the vehicle's bodywork. This design choice not only contributes to a cleaner, more integrated aesthetic but also provides a crucial layer of physical protection for the lamp. By reducing its protrusion, the risk of damage from impacts, snags, or scraping is substantially minimized, a common concern for vehicles operating in diverse conditions, from tight loading docks to rugged off-road terrains. The grommet itself is an integral part of this robust mounting system, providing a secure, vibration-dampening seal that helps absorb shocks and prevent moisture and dust ingress, further enhancing the light's durability and reliability in adverse weather or challenging operational environments.

Connectivity is streamlined through the use of an industry-standard PL-3 connection. This 3-pin configuration is widely recognized and utilized in the commercial vehicle industry for stop, turn, and tail light applications, ensuring broad compatibility and ease of replacement or upgrade. The three wires correspond to the essential functions: one for ground, one for the tail/running light, and one for the stop/turn signal. This standardized wiring convention simplifies installation for technicians and ensures consistent electrical interfacing with existing vehicle wiring harnesses. The fact that the kit includes both the necessary grommet and the PL-3 plug for installation signifies a commitment to providing a complete, ready-to-deploy solution, eliminating the need for separate component sourcing and streamlining the installation process for maximum efficiency.

Adherence to FMVSS/CMVSS 108 is a non-negotiable requirement for all lighting components on vehicles operating in the United States and Canada. FMVSS 108 (Federal Motor Vehicle Safety Standard No. 108, "Lamps, Reflective Devices, and Associated Equipment") and CMVSS 108 (Canadian Motor Vehicle Safety Standard No. 108) specify comprehensive requirements for the performance, location, and photometric characteristics of all vehicle lighting and reflective devices. For stop/turn/tail lights, these standards dictate minimum and maximum light intensities, color specifications (red), visibility angles, and operational reliability under various conditions. The Buyers Products 6-inch LED light is engineered and rigorously tested to ensure full compliance with these critical regulations, thereby guaranteeing that vehicles equipped with this light meet legal requirements for road safety and are compliant during inspections. This compliance is not merely a legal formality; it is fundamental to road safety, as properly functioning and compliant lighting is crucial for communicating a vehicle's intentions to other road users, especially during braking, turning, and in low-visibility situations.

The operational versatility of this 6-inch red oval light makes it an ideal solution for a multitude of applications. While primarily designed for heavy-duty trucks and trailers, its robust construction and high performance extend its suitability to utility trailers, recreational vehicles (RVs), agricultural machinery, construction equipment, and even specialized service vehicles. Fleet managers benefit from the longevity and reduced maintenance of LED technology, leading to lower operational costs and increased vehicle uptime. Independent operators gain peace of mind from reliable, high-visibility lighting that enhances safety and reduces the risk of accidents. For original equipment manufacturers (OEMs) and aftermarket installers, the complete kit with grommet and plug simplifies procurement and installation, ensuring a consistent, high-quality outcome every time.

The limited lifetime warranty backing this product underscores the manufacturer's confidence in its design, materials, and workmanship. This warranty is a testament to the expected durability and long-term performance of the LED light, offering assurance to purchasers that their investment is protected against defects. Such a commitment from the manufacturer highlights the rigorous quality control processes and the selection of premium components employed in the production of this lighting solution.

In summary, the Buyers Products 6 Inch Red Oval Stop/Turn/Tail Light with 20 LEDs Kit represents an advanced, highly reliable, and fully compliant lighting solution. Its integration of efficient 20-LED technology, rugged polycarbonate lens and plastic housing, standardized PL-3 connectivity, and recessed mounting design, coupled with included installation hardware, positions it as a superior choice for demanding applications. The product's adherence to FMVSS/CMVSS 108 ensures legal compliance and paramount safety on the road. By combining exceptional photometric performance, energy efficiency, and unparalleled durability with an easy-to-install kit and a robust warranty, this LED light delivers significant operational advantages and long-term value for all commercial and heavy-duty vehicle requirements. It stands as an indispensable component for any vehicle demanding optimal visibility, unwavering reliability, and strict regulatory adherence, contributing directly to safer transportation systems.